HELP!! Windows 7 problem - System Check

Message boards : Number crunching : HELP!! Windows 7 problem - System Check
Message board moderation

To post messages, you must log in.

Previous · 1 · 2 · 3

AuthorMessage
Profile zoom3+1=4
Volunteer tester
Avatar

Send message
Joined: 30 Nov 03
Posts: 65690
Credit: 55,293,173
RAC: 49
United States
Message 1208677 - Posted: 22 Mar 2012, 1:13:11 UTC

Got the EVGA Classified GTX590 installed and it's crunching away @ 630MHz and with the fan locked at 95%, and the voltage locked also(0.9380v), the temps are 80/89C for the 590 and 51C for the 460, Now the Silverstone ST1500 1500w psu has something to run with. So far so good, the 590 and 275.50 are getting along just fine...
The T1 Trust, PRR T1 Class 4-4-4-4 #5550, 1 of America's First HST's
ID: 1208677 · Report as offensive
Profile dnolan
Avatar

Send message
Joined: 30 Aug 01
Posts: 1228
Credit: 47,779,411
RAC: 32
United States
Message 1208717 - Posted: 22 Mar 2012, 4:21:49 UTC - in response to Message 1208657.  

ya i succeed to update it : via a CD RW 74mins.


as we can see 1302. but my gtx480 still in PCIe 1.1 :(

i didnt see anything new in my BIOS menu either :(


Did you try running the render test in GPU-Z to see if that changed anything? The text in that says "One of these functions reduces the PCI-Express link speed & width to lower levels to conserve power when the card is idle.
This is why you might see undesired values in GPU-Z's bus interface readout."

Worth a try?

-Dave
ID: 1208717 · Report as offensive
Claggy
Volunteer tester

Send message
Joined: 5 Jul 99
Posts: 4654
Credit: 47,537,079
RAC: 4
United Kingdom
Message 1209030 - Posted: 22 Mar 2012, 21:47:05 UTC - in response to Message 1208732.  
Last modified: 22 Mar 2012, 21:48:20 UTC

Nvidia knows about this Bug:

PCIe 2.0 graphics card is only running in PCIe 1.0 speed with Intel X38 chipset.

NVIDIA graphics drivers will lock PCI Express to PCIe 1.0 speeds on Intel X38 chipsets as we have seen reports of X38 chipsets not switching properly between PCIe 1.0 and PCIe 2.0. This is expected behavior and will help to insure stability while we continue to investigate the problem


Claggy
ID: 1209030 · Report as offensive
Profile zoom3+1=4
Volunteer tester
Avatar

Send message
Joined: 30 Nov 03
Posts: 65690
Credit: 55,293,173
RAC: 49
United States
Message 1209034 - Posted: 22 Mar 2012, 22:05:13 UTC - in response to Message 1209030.  

Nvidia knows about this Bug:

PCIe 2.0 graphics card is only running in PCIe 1.0 speed with Intel X38 chipset.

NVIDIA graphics drivers will lock PCI Express to PCIe 1.0 speeds on Intel X38 chipsets as we have seen reports of X38 chipsets not switching properly between PCIe 1.0 and PCIe 2.0. This is expected behavior and will help to insure stability while we continue to investigate the problem


Claggy

I'm glad that I have P55 then.
The T1 Trust, PRR T1 Class 4-4-4-4 #5550, 1 of America's First HST's
ID: 1209034 · Report as offensive
Profile Fred J. Verster
Volunteer tester
Avatar

Send message
Joined: 21 Apr 04
Posts: 3252
Credit: 31,903,643
RAC: 0
Netherlands
Message 1209220 - Posted: 23 Mar 2012, 11:58:24 UTC - in response to Message 1209107.  
Last modified: 23 Mar 2012, 12:02:25 UTC

THANKS YOU Claggy.
welllllll. /cryyyyy

or I hope they resolve the bug very very fast
or i ll have to buy another Mainboard with different chipset for my main X9650

like this Striker II Extreme with a chipset : NVIDIA nForce 790i Ultra SLI

/cryyyyy


Well, got the same 'problem', with an ASUS P5E, X9650 CPU and GTX480 GPU, running in PCIe 16x ver. 1.1, although it runs ATI cards f.i. 5870 in PCIe 16x
ver. 2.0 . Has to be the X38 chipset.
This host .

(Something completely different: all x86 WIN XP/VISTA & 7 hosts, were infected with 2 different trojans! Hidden in pagefil.sys and hyberfil.sys) Used an Avast Rescue Disk to remove them, my LT (HP Pavillion 8000) had 6 of them!

Had to call my ISP (KPNPlanet) for a new MODEM, digital TV and even phone line
didn't work correct! Still have to clean out my I7-2600, also infected
with probably the same trojans!
ID: 1209220 · Report as offensive
Profile Fred J. Verster
Volunteer tester
Avatar

Send message
Joined: 21 Apr 04
Posts: 3252
Credit: 31,903,643
RAC: 0
Netherlands
Message 1209247 - Posted: 23 Mar 2012, 13:52:35 UTC - in response to Message 1209220.  
Last modified: 23 Mar 2012, 14:08:15 UTC

THANKS YOU Claggy.
welllllll. /cryyyyy

or I hope they resolve the bug very very fast
or i ll have to buy another Mainboard with different chipset for my main X9650

like this Striker II Extreme with a chipset : NVIDIA nForce 790i Ultra SLI

/cryyyyy


Well, got the same 'problem', with an ASUS P5E, X9650 CPU and GTX480 GPU, running in PCIe 16x ver. 1.1, although it runs ATI cards f.i. 5870 in PCIe 16x
ver. 2.0 . Has to be the X38 chipset.
This host .

(Something completely different: all x86 WIN XP/VISTA & 7 hosts, were infected with 2 different trojans! Hidden in pagefil.sys and hyberfil.sys) Used an Avast Rescue Disk to remove them, my LT (HP Pavillion 8000) had 6 of them!

Had to call my ISP (KPNPlanet) for a new MODEM, digital TV and even phone line
didn't work correct! Still have to clean out my I7-2600, also infected
with probably the same trojans!


Also had to clean out the Registry, by hand using Regedt32.exe* and found remnants of Norton(2010!) and bits of AVG(2011) and lots of other
Removed/Deïnstalled program remnants! Took me sevaral hours.......
*%Windows\system32\regedt32.exe
ID: 1209247 · Report as offensive
Profile zoom3+1=4
Volunteer tester
Avatar

Send message
Joined: 30 Nov 03
Posts: 65690
Credit: 55,293,173
RAC: 49
United States
Message 1209252 - Posted: 23 Mar 2012, 14:07:15 UTC - in response to Message 1209247.  

THANKS YOU Claggy.
welllllll. /cryyyyy

or I hope they resolve the bug very very fast
or i ll have to buy another Mainboard with different chipset for my main X9650

like this Striker II Extreme with a chipset : NVIDIA nForce 790i Ultra SLI

/cryyyyy


Well, got the same 'problem', with an ASUS P5E, X9650 CPU and GTX480 GPU, running in PCIe 16x ver. 1.1, although it runs ATI cards f.i. 5870 in PCIe 16x
ver. 2.0 . Has to be the X38 chipset.
This host .

(Something completely different: all x86 WIN XP/VISTA & 7 hosts, were infected with 2 different trojans! Hidden in pagefil.sys and hyberfil.sys) Used an Avast Rescue Disk to remove them, my LT (HP Pavillion 8000) had 6 of them!

Had to call my ISP (KPNPlanet) for a new MODEM, digital TV and even phone line
didn't work correct! Still have to clean out my I7-2600, also infected
with probably the same trojans!


Also had to clean out the Registry, by hand using Regedit and found remnants of Norton(2010!) and bits of AVG(2011) and lots of other
Removed/Deïnstalled program remnants! Took me sevaral hours.......




Sounds particularly nasty alright.
The T1 Trust, PRR T1 Class 4-4-4-4 #5550, 1 of America's First HST's
ID: 1209252 · Report as offensive
Profile Lint trap

Send message
Joined: 30 May 03
Posts: 871
Credit: 28,092,319
RAC: 0
United States
Message 1210269 - Posted: 26 Mar 2012, 12:20:20 UTC - in response to Message 1210228.  
Last modified: 26 Mar 2012, 12:27:24 UTC


In my system,the GPU-Z shows
the card working on PCIe 2.0 X16 @ X16 2.0 mode,and the cuda-z shows the memory
copy "Host Pinned to Device","Device to Host Pinned" are about 5000 MB/S.So it is really working on PCIe 2.0 mode.


YOU ARE the Sword Master!!! :)


Do you know what CUDA-Z reported for 'pinned' values before modding the driver, "5000 MB/S" seems slow for Gen 2 - on my P43/P45 LGA 775 board it shows ~50,000 MB/S??

edited..

MY MISTAKE...darned eyes...I was looking at device-to-device value.

You are Correct...~5000 MB/s for pinned value.



Lt
ID: 1210269 · Report as offensive
Previous · 1 · 2 · 3

Message boards : Number crunching : HELP!! Windows 7 problem - System Check


 
©2024 University of California
 
SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.