Hey @ all,

I'm getting no WU's since 5 Oct 2011 for all my computers using a proxy :-(

11.10.2011 12:35:01 SETI@home Started upload of 29mr11af.21515.6202.7.10.82_1_0
11.10.2011 12:36:06 Using proxy info from GUI
11.10.2011 12:36:06 Using HTTP proxy 145.254.22.10:8000
11.10.2011 12:37:02 SETI@home Temporarily failed upload of 29mr11af.21515.6202.7.10.82_1_0: HTTP error
11.10.2011 12:37:02 SETI@home Backing off 1 min 0 sec on upload of 29mr11af.21515.6202.7.10.82_1_0


Hopeful

Cpoint

Same old, same old. Still can't upload finished WU's or get new ones. Getting close to the deadline the finished ones have to be reported. Looks like I will lose them. Wasted crunching time. Very frustrating. I like this project and have been with it since 1999, but I'm thinking of leaving and devoting all my computer time to Einstein@home or other projects. Makes no sense to devote computer time to crunching for this project and end up losing it because we can't report the finished WU's.

---

The machine at work can't ping the lab, but the ones at home are getting work.

While we are in the outage, can you guys reboot the router?

TNX!

---

ISP DSL Extreme Los Angeles, CA
When, a week.


C:\Documents and Settings\Hector>ping 208.68.240.13

Pinging 208.68.240.13 with 32 bytes of data:

Request timed out.
Request timed out.
Request timed out.
Request timed out.

Ping statistics for 208.68.240.13:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),

C:\Documents and Settings\Hector>ping 208.68.240.16

Pinging 208.68.240.16 with 32 bytes of data:

Request timed out.
Request timed out.
Request timed out.
Request timed out.

Ping statistics for 208.68.240.16:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),

C:\Documents and Settings\Hector>ping 208.68.240.18

Pinging 208.68.240.18 with 32 bytes of data:

Request timed out.
Request timed out.
Request timed out.
Request timed out.

Ping statistics for 208.68.240.18:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),

C:\Documents and Settings\Hector>ping 208.68.240.20

Pinging 208.68.240.20 with 32 bytes of data:

Request timed out.
Request timed out.
Request timed out.
Request timed out.

Ping statistics for 208.68.240.20:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\Hector>tracert 208.68.240.13

Tracing route to boinc2.ssl.berkeley.edu [208.68.240.13]
over a maximum of 30 hops:

1 <1 ms <1 ms <1 ms 192.168.1.1
2 43 ms 46 ms 45 ms netblock-208-127-94-1.dslextreme.com [208.127.94
.1]
3 44 ms 46 ms 46 ms lax1_cr1_gig_10_0_120.dslextreme.com [66.218.48.
145]
4 59 ms 58 ms 58 ms netblock-66-51-198-182.dslextreme.com [66.51.198
.182]
5 59 ms 61 ms 61 ms 10gigabitethernet2-3.core1.sjc2.he.net [206.223.
116.37]
6 61 ms 71 ms 61 ms 10gigabitethernet3-2.core1.pao1.he.net [72.52.92
.69]
7 * * * Request timed out.
8 * * * Request timed out.
9 * * * Request timed out.
10 * * * Request timed out.
11 * * * Request timed out.
12 * * * Request timed out.
13 * * * Request timed out.
14 * * * Request timed out.
15 * * * Request timed out.
16 * * * Request timed out.
17 * * * Request timed out.
18 * * * Request timed out.
19 * * * Request timed out.
20 * * * Request timed out.
21 * * * Request timed out.
22 * * * Request timed out.
23 * * * Request timed out.
24 * * * Request timed out.
25 * * * Request timed out.
26 * * * Request timed out.
27 * * * Request timed out.
28 * * * Request timed out.
29 * * * Request timed out.
30 * * * Request timed out.

Trace complete.

---

I cannot connect, either. I've tried the following Proxies with no luck.

12.118.224.151:80
216.24.193.211:8080
217.196.235.18:80
82.206.129.160:3128
145.254.22.10:8000
208.68.240.13

Tue Oct 11 16:41:49 2011 | SETI@home | Temporarily failed upload of 22jl11ae.1696.22971.3.10.200_0_0: connect() failed

That's the general error I've been getting. When I remove the proxy, it's not working that way either. I haven't been able to connect since Oct 5. :( My other project, World Community Project, it connecting fine, uploading and downloading projects.

I've been reading the posts hoping to find a fix but so far, no go.

---

Hi Guys,

Seti ran out of work and I'm getting no WU's, the provider is UPC in the Netherlands,

Ejo

Same problem here in HK, China

---

As I can see, there are two ways to SETI: through HE and through Level3 (from mine) + CENIC.NET :

7           	75          	20          	195.34.53.102  	anc-cr01-be3.ff.stream-internet.net
 8	*	*	Timed out
9           	74          	9           	4.69.154.190   	vlan80.csw3.Frankfurt1.Level3.net
10          	55          	-21         	4.69.140.25    	ae-82-82.ebr2.Frankfurt1.Level3.net
11          	64          	9           	4.69.148.197   	ae-24-24.ebr2.London1.Level3.net
12          	142         	78          	4.69.137.78    	ae-44-44.ebr1.NewYork1.Level3.net
13          	174         	18          	4.69.134.66    	ae-61-61.csw1.NewYork1.Level3.net
14          	143         	-36         	4.69.148.33    	ae-62-62.ebr2.NewYork1.Level3.net
15          	201         	63          	4.69.135.185   	ae-2-2.ebr4.SanJose1.Level3.net
16          	202         	1           	4.69.153.6     	ae-71-71.csw2.SanJose1.Level3.net
17          	215         	12          	4.69.152.67    	ae-21-70.car1.SanJose1.Level3.net
18          	201         	-8          	4.53.16.186    	CENIC.car1.SanJose1.Level3.net
19          	207         	6           	137.164.47.133 	dc-svl-core1--svl-isp1-10ge.cenic.net
20          	204         	0           	137.164.47.120 	dc-svl-agg1--svl-core1-10ge.cenic.net
21          	215         	11          	137.164.50.19  	dc-ucb--svl-agg1-10ge.cenic.net
22          	203         	-6          	128.32.0.67    	t1-3.inr-202-reccev.Berkeley.EDU
23          	204         	1           	128.32.255.107 	g5-2.inr-204-sut.Berkeley.EDU
24	*	*	Timed out
25          	204         	-6          	128.32.18.150  	setiathome.berkeley.edu

7           	59          	4           	195.34.53.102  	anc-cr01-be3.ff.stream-internet.net
8           	67          	9           	80.81.192.172  	20gigabitethernet4-3.core1.fra1.he.net
9           	70          	3           	184.105.213.162	10gigabitethernet1-4.core1.par2.he.net
10          	160         	90          	184.105.213.93 	10gigabitethernet7-1.core1.ash1.he.net
11          	234         	63          	184.105.213.177	10gigabitethernet7-4.core1.pao1.he.net
12          	226         	-4          	64.71.140.42
13          	262         	36          	208.68.243.254
14          	265         	2           	208.68.240.20  	setiboinc.ssl.berkeley.edu

So it might be worth to split UL\DL stream between them: the main stream leave by HE, but a little get through CENIC for people who can't reach HE. Am I right?

---

Messages tab is full of items like this:

SETI@home 13/10/2011 6:17:35am Requesting new tasks
SETI@home 13/10/2011 6:17:57am Scheduler request failed: HTTP gateway timeout

Any news on when more data will be available? I ran out of tasks well over a week ago and still no new downloads from SETI@home. It has run well on current machine for over a year without a glitch... I don't have to reconfigure anything for the current setup to get it going again do I?

Regards, Bryce.

---

I only get the following:

52	SETI@home	10/12/2011 6:39:09 PM	Message from server: Your app_info.xml file doesn't have a usable version of Astropulse v505.

I wish the server would stop sending these messages as they do no good.

---

The T1 Trust, PRR T1 Class 4-4-4-4 #5550, 1 of America's First HST's

I only get the following:

52	SETI@home	10/12/2011 6:39:09 PM	Message from server: Your app_info.xml file doesn't have a usable version of Astropulse v505.

I wish the server would stop sending these messages as they do no good.

That one is very important. You have problems and it can't send you work until you fix the problem. There is an error in the app_info.xml file on your machine. As I suspect you are using Lunatics optimized apps, re-install them. It should fix it.

---

I only get the following:

52	SETI@home	10/12/2011 6:39:09 PM	Message from server: Your app_info.xml file doesn't have a usable version of Astropulse v505.

I wish the server would stop sending these messages as they do no good.

That one is very important. You have problems and it can't send you work until you fix the problem. There is an error in the app_info.xml file on your machine. As I suspect you are using Lunatics optimized apps, re-install them. It should fix it.

My app file is fine, It wants Me to run Astro, No Dogs are allowed here. I got 49 seti wu's last time I tried after that appeared.

---

The T1 Trust, PRR T1 Class 4-4-4-4 #5550, 1 of America's First HST's

Hello.
Server status page shows that somebody uploads results.
I have 2800 results to upload and upload not working.
I use my local SQUID proxy and direct connect too, result is still "failed upload".
SQUID log :
1318482068.738 63000 193.84.47.243 TCP_MISS/503 1527 POST http://setiboincdata.ssl.berkeley.edu/sah_cgi/file_upload_handler - DIRECT/208.68.240.16 text/html
1318482070.657 63000 10.70.1.176 TCP_MISS/503 1487 POST http://setiboinc.ssl.berkeley.edu/sah_cgi/cgi - DIRECT/208.68.240.20 text/html
traceroute to setiboincdata.ssl.berkeley.edu (208.68.240.16), 30 hops max, 40 byte packets
3 r40-ge2-2-czu.cesnet.cz (195.178.64.81) 1.292 ms 1.296 ms 1.258 ms
4 195.113.235.101 (195.113.235.101) 1.232 ms 1.194 ms 1.089 ms
5 20gigabitethernet1-3.core1.ams1.he.net (195.69.145.150) 16.395 ms 28.796 ms 28.877 ms
6 10gigabitethernet2-1.core1.par2.he.net (184.105.213.102) 26.445 ms 26.453 ms 26.424 ms
7 10gigabitethernet7-1.core1.ash1.he.net (184.105.213.93) 104.823 ms 104.528 ms 104.535 ms
8 10gigabitethernet7-4.core1.pao1.he.net (184.105.213.177) 174.815 ms 174.804 ms 174.835 ms
9 * * *
10 * * *
11 * * *
12 * * *
13 * * *
14 * * *
15 * * *
16 * * *
17 * * *
18 * * *
19 * * *
20 * * *
21 * * *
22 * * *
23 * * *
24 * * *
25 * * *
26 * * *
27 * * *
28 * * *
29 * * *
30 * * *

traceroute to setiboinc.ssl.berkeley.edu (208.68.240.20), 30 hops max, 40 byte packets
3 r40-ge2-2-czu.cesnet.cz (195.178.64.81) 1.256 ms 1.243 ms 1.233 ms
4 195.113.235.101 (195.113.235.101) 1.161 ms 1.145 ms 1.033 ms
5 20gigabitethernet1-3.core1.ams1.he.net (195.69.145.150) 16.350 ms 16.388 ms 24.683 ms
6 10gigabitethernet2-1.core1.par2.he.net (184.105.213.102) 26.513 ms 26.368 ms 26.413 ms
7 10gigabitethernet7-1.core1.ash1.he.net (184.105.213.93) 104.997 ms 115.549 ms 112.050 ms
8 10gigabitethernet7-4.core1.pao1.he.net (184.105.213.177) 175.142 ms 175.128 ms 175.199 ms
9 * * *
10 * * *
11 * * *
12 * * *
13 * * *
14 * * *
15 * * *
16 * * *
17 * * *
18 * * *
19 * * *
20 * * *
21 * * *
22 * * *
23 * * *
24 * * *
25 * * *
26 * * *
27 * * *
28 * * *
29 * * *
30 * * *

DNS working.
Connection by CESNET in Czech Republic.

Why someone sends results and I no ?
Thanks
Libor

---

Hello,

still I'm getting no WU's for all my computers using a proxy.
I've reboot the router for 2 times.
I can't upload finished WU's, and the deadline is the 14.10.2011.
So i will lose them, too.
Einstein@home works.
Very frustrating, so i'm with Richard1949.

doesn't that mean as much as that you may have to reset your project so that it installs fresh new code?

Hello.
Server status page shows that somebody uploads results.
I have 2800 results to upload and upload not working.
I use my local SQUID proxy and direct connect too, result is still "failed upload".

(trace & ping logs deleted - DLJ)

DNS working.
Connection by CESNET in Czech Republic.

Why someone sends results and I no ?
Thanks
Libor

Part of the problem with the flakey router at HE PAIX is that it doesn't always block the same routes each time it resets. You may have to try several different proxies until you find one that works, and it may only work for a short time, then you have to find another one that can get through to S@H.

---

Donald
Infernal Optimist / Submariner, retired

Hello.
Server status page shows that somebody uploads results.
I have 2800 results to upload and upload not working.
I use my local SQUID proxy and direct connect too, result is still "failed upload".

(trace & ping logs deleted - DLJ)

DNS working.
Connection by CESNET in Czech Republic.

Why someone sends results and I no ?
Thanks
Libor

Part of the problem with the flakey router at HE PAIX is that it doesn't always block the same routes each time it resets. You may have to try several different proxies until you find one that works, and it may only work for a short time, then you have to find another one that can get through to S@H.

Sounds like a certain sequence in Tron... EOL.

---

The T1 Trust, PRR T1 Class 4-4-4-4 #5550, 1 of America's First HST's

Part of the problem with the flakey router at HE PAIX is that it doesn't always block the same routes each time it resets. You may have to try several different proxies until you find one that works, and it may only work for a short time, then you have to find another one that can get through to S@H.

I try with my local SQUID proxy (all one IP address) and direct connect to S@H (different public IP adress). All attempts failed.
There is a list of public proxies that works with S@H?
Regards,
Libor

---

Part of the problem with the flakey router at HE PAIX is that it doesn't always block the same routes each time it resets. You may have to try several different proxies until you find one that works, and it may only work for a short time, then you have to find another one that can get through to S@H.

I try with my local SQUID proxy (all one IP address) and direct connect to S@H (different public IP adress). All attempts failed.
There is a list of public proxies that works with S@H?
Regards,
Libor

In the Temporary Fix thread are several proxies that work or have worked for various people. If the one listed in the most recent post (216.24.193.211:8080) doesn't work for you, read down through the thread to find more.

---

Donald
Infernal Optimist / Submariner, retired

In the Temporary Fix thread are several proxies that work or have worked for various people. If the one listed in the most recent post (216.24.193.211:8080) doesn't work for you, read down through the thread to find more.

Hello,
thank you for answer.
I try add into squid.conf parent proxy :
cache_peer 69.170.78.62 parent 3128 0 no-query default
cache_peer_domain 69.170.78.62 .ssl.berkeley.edu

This working now and I slowly send results.
Maybe I full up this proxy for S@H and I will try another.
Regards,
Libor

---

squid.conf :
cache_peer 69.170.78.62 parent 3128 0 no-query default max-conn=5
cache_peer_domain 69.170.78.62 .ssl.berkeley.edu
never_direct allow all

Maybe it helps someone.
Regards,
Libor

---