CUDA in SLI = Computation Errors? |
![]() |
| log in |
Questions and Answers : GPU applications : CUDA in SLI = Computation Errors?
| Author | Message |
|---|---|
|
Remove the email address from the post (you have 1 hour to do that) or you will receive spam.
_____________________________
setiathome_CUDA: Found 2 CUDA device(s):
Device 1 : GeForce 9800 GT
totalGlobalMem = 536870912
sharedMemPerBlock = 16384
regsPerBlock = 8192
warpSize = 32
memPitch = 262144
maxThreadsPerBlock = 512
clockRate = 1500000
totalConstMem = 65536
major = 1
minor = 1
textureAlignment = 256
deviceOverlap = 1
multiProcessorCount = 14
Device 2 : GeForce 8200
totalGlobalMem = 536870912
sharedMemPerBlock = 16384
regsPerBlock = 8192
warpSize = 32
memPitch = 262144
maxThreadsPerBlock = 512
clockRate = 1200000
totalConstMem = 65536
major = 1
minor = 1
textureAlignment = 256
deviceOverlap = 0
multiProcessorCount = 1
_____________________________
setiathome_CUDA: Found 3 CUDA device(s):
Device 1 : GeForce 9800 GT
totalGlobalMem = 536870912
sharedMemPerBlock = 16384
regsPerBlock = 8192
warpSize = 32
memPitch = 262144
maxThreadsPerBlock = 512
clockRate = 1500000
totalConstMem = 65536
major = 1
minor = 1
textureAlignment = 256
deviceOverlap = 1
multiProcessorCount = 14
Device 2 : nForce 980a/780a SLI
totalGlobalMem = 268435456
sharedMemPerBlock = 16384
regsPerBlock = 8192
warpSize = 32
memPitch = 262144
maxThreadsPerBlock = 512
clockRate = 1200000
totalConstMem = 65536
major = 1
minor = 1
textureAlignment = 256
deviceOverlap = 0
multiProcessorCount = 1
Device 3 : GeForce 9800 GT
totalGlobalMem = 536870912
sharedMemPerBlock = 16384
regsPerBlock = 8192
warpSize = 32
memPitch = 262144
maxThreadsPerBlock = 512
clockRate = 1500000
totalConstMem = 65536
major = 1
minor = 1
textureAlignment = 256
deviceOverlap = 1
multiProcessorCount = 14
_____________________________
GeForce 9800 GT GeForce 8200 nForce 980a/780a SLI ??? ____________ - ALF - "Find out what you don't do well ..... then don't do it!" :) | |
| ID: 982692 · | |
|
I just built a new system and was in the same situation as u, I disabled sli and all is good right now. But im not sure if this is going to help u or not as the system i am working on is windows 7, but without disabling sli, it would process one or two work units without any problem, then i would get a slug of computation errors, hope this helps u | |
| ID: 982943 · | |
|
I'm having problems with my 8800GTX cards in SLI. After I turned this on and SETI did some work my machine would become unstable. For now I've turned SETI off. Is SETI /w SLI considered to be stable? | |
| ID: 991150 · | |
Questions and Answers : GPU applications : CUDA in SLI = Computation Errors?
| Copyright © 2013 University of California |