Controling CUDA in preferences

Questions and Answers : GPU applications : Controling CUDA in preferences
Message board moderation

To post messages, you must log in.

AuthorMessage
Profile AlienDancer
Volunteer tester
Avatar

Send message
Joined: 8 Sep 99
Posts: 68
Credit: 12,473,416
RAC: 0
Message 859484 - Posted: 29 Jan 2009, 23:37:25 UTC

There is a place in preferences where I can choose to process cuda - "Use Graphics Processing Unit (GPU) if available" - I currently have it set to yes and have lots of cuda units but nothing else. My CPU runs about 95C when processing cuda so I'd like to give it a rest after awhile. If I say no, will it continue to process the cuda already downloaded. What I'd like to do is control the amount of cuda units I have at one time and not get new ones until all the ones I have are processed. I would like to continue to get AP units when available so I don't want to use the option to not get any new tasks. Anyway I can do this?
ID: 859484 · Report as offensive
Profile Borgholio
Avatar

Send message
Joined: 2 Aug 99
Posts: 654
Credit: 18,623,738
RAC: 45
United States
Message 859486 - Posted: 29 Jan 2009, 23:53:08 UTC - in response to Message 859484.  

Setting GPU processing to "no" will prevent you from downloading new CUDA units. You will still process the ones you already have. As a side note, 95c is dangerously high. I would suggest you look at your card's cooling system immediately.
You will be assimilated...bunghole!

ID: 859486 · Report as offensive
Profile MeglaW
Volunteer tester

Send message
Joined: 21 Jun 00
Posts: 36
Credit: 479,460
RAC: 0
Sweden
Message 859569 - Posted: 30 Jan 2009, 3:10:13 UTC

if its relly 95c u need to invest in better cooling.
ID: 859569 · Report as offensive
Profile Borgholio
Avatar

Send message
Joined: 2 Aug 99
Posts: 654
Credit: 18,623,738
RAC: 45
United States
Message 859592 - Posted: 30 Jan 2009, 4:29:02 UTC - in response to Message 859569.  

if its relly 95c u need to invest in better cooling.


Or a new card if you don't cool it down quickly. :-P
You will be assimilated...bunghole!

ID: 859592 · Report as offensive
Profile AlienDancer
Volunteer tester
Avatar

Send message
Joined: 8 Sep 99
Posts: 68
Credit: 12,473,416
RAC: 0
Message 859682 - Posted: 30 Jan 2009, 11:09:17 UTC - in response to Message 859592.  

It's been running 95c for a long time anytime I do anything intense. I was worried about it at first but doesn't seem to be a problem. I checked and there are a few others whose cards run that high. I notice a post last night where someone got their temps down by loading the new drivers and this morning after running cuda all night my temps were 89c. That's a 6c drop. I'm also going to try RivaTune and I've had the case open and a fan blowing directly into it ever since the summer when I got higher temps.

Bottom line - while I'd rather not go through the hassle of replacing the card, this thing has an extended warranty until Aug 2011 -- so I'm not too worried about frying the card.
ID: 859682 · Report as offensive
Profile Byron S Goodgame
Volunteer tester
Avatar

Send message
Joined: 16 Jan 06
Posts: 1145
Credit: 3,936,993
RAC: 0
United States
Message 859693 - Posted: 30 Jan 2009, 12:00:55 UTC - in response to Message 859682.  

It's been running 95c for a long time anytime I do anything intense. I was worried about it at first but doesn't seem to be a problem. I checked and there are a few others whose cards run that high. I notice a post last night where someone got their temps down by loading the new drivers and this morning after running cuda all night my temps were 89c. That's a 6c drop. I'm also going to try RivaTune and I've had the case open and a fan blowing directly into it ever since the summer when I got higher temps.

Bottom line - while I'd rather not go through the hassle of replacing the card, this thing has an extended warranty until Aug 2011 -- so I'm not too worried about frying the card.

Hi,
If you installed the lastest drivers for your card NVIDIA GeForce 9800 GT (512MB), either the 181.20 or the 181.22 then, if you haven't already, you can install the NVIDIA System Tools software and you should then be able to control the fan speed on the card from the nvidia control panel.
ID: 859693 · Report as offensive
Profile AlienDancer
Volunteer tester
Avatar

Send message
Joined: 8 Sep 99
Posts: 68
Credit: 12,473,416
RAC: 0
Message 859756 - Posted: 30 Jan 2009, 15:13:05 UTC - in response to Message 859693.  

I loaded the 181.22 drivers last night, that seemed to knock the temp down by the 6C I mentioned to 89C. However I noticed that when cuda is running when I'm using the machine which it often does to finish a unit the temp reached 101c. It's probably been doing this since I got the machine back in Aug. I never monitored the temp intensely before cuda. I think this card must just run hot. The temp with out any load stays around 62c and nothing seems to get it lower. Its a GT9600.

Manually increasing the fan speed took the 100% took temp down.

I already had the NVIDIA System Tools software and the fan speed was set to 48%. I just created profiles to run the fan speed faster if the temp exceeds 70C and 80C. I'll see what happens.

Thanks for advice.


ID: 859756 · Report as offensive
Profile Byron S Goodgame
Volunteer tester
Avatar

Send message
Joined: 16 Jan 06
Posts: 1145
Credit: 3,936,993
RAC: 0
United States
Message 859863 - Posted: 30 Jan 2009, 22:28:00 UTC - in response to Message 859756.  
Last modified: 30 Jan 2009, 22:44:24 UTC

The temp with out any load stays around 62c and nothing seems to get it lower. Its a GT9600.

It's probably nothing, but you mention the card is a 9600. Which pc is that on? Is it this pc? Do you have more than one card on that computer?
I don't see any other pc's of yours with a CUDA card on it, so I was just curious, since Boinc seems to show that one as a NVIDIA GeForce 9800 GT (512MB), and I assumed it was the pc we were talking about.

However I noticed that when cuda is running when I'm using the machine which it often does to finish a unit the temp reached 101c

If you card is like mine the max temp is 105C, which you are in my opinion getting too close to, so hopefully the fan speed adjustments help.

Edit: grammer
ID: 859863 · Report as offensive
Profile AlienDancer
Volunteer tester
Avatar

Send message
Joined: 8 Sep 99
Posts: 68
Credit: 12,473,416
RAC: 0
Message 859884 - Posted: 30 Jan 2009, 23:19:17 UTC - in response to Message 859863.  

Oops sorry I missed keyed meant 9800 - it is in fact a NVIDIA GeForce 9800 GT (512MB). Machine got to 101c this morning. I tried creating profiles for when temp got to high but that doesn't seem to be working. Fan speed is not increasing unless I do it manually.

Also this afternoon I purposely put extra stress on card temp showed 105C. I'm sure its been like this since I got machine in August. Could sensor be wrong. I've never had a problem except when cuda first came out it would abort and cause screen to get pixilated. Haven't had that problem for a few weeks.

I set up this profile, then went into profile polices to run it whenever temp was > 80. Sorry can't get a screen print of it. It doesn't seem to kick in even when temp reaches 90. Changing fan speed manually works.

[BoardConfiguration]
Version=200
CPU=10677
MCP=65535
SPP=65534
GPU=NVIDIA GeForce 9800 GT

[ClockSettings]
FSBMHZ=0
AGPMHZ=-1
PCIe2MHZ=-1
CpuCore0Mul= 6.0
CpuCore1Mul= 6.0
CpuCore2Mul= 6.0
CpuCore3Mul= 6.0
CpuCore4Mul=-1.0
CpuCore5Mul=-1.0
CpuCore6Mul=-1.0
CpuCore7Mul=-1.0
TRAS=0
TRCD=0
TRP=0
GPUCOREMHZ0=650
GPUMEMMHZ0=950
GPUSHADERMHZ0=1625

[VoltageSettings]
CPUVOLTAGE=-1
NFORCEVOLTAGE=-1
MEMVOLTAGE=-1
AGPVOLTAGE=-1
AUXVOLTAGE=-1
CPUFAN=-1
AUXFAN1=-1
HTCPUSPPVOL=-1
HTSPPMCPVOL=-1
NFORCEFAN=-1
AUX1FAN=-1
AUX2FAN=-1
GPUFAN3D0=100


ID: 859884 · Report as offensive
Profile Byron S Goodgame
Volunteer tester
Avatar

Send message
Joined: 16 Jan 06
Posts: 1145
Credit: 3,936,993
RAC: 0
United States
Message 859903 - Posted: 31 Jan 2009, 0:19:27 UTC - in response to Message 859884.  

Also this afternoon I purposely put extra stress on card temp showed 105C. I'm sure its been like this since I got machine in August. Could sensor be wrong.

What program are you using to get the gpu temp? You mentioned RivaTune earlier, are you using that to control the fan speed or the nVidia prog?

BTW who makes the card? Do they have a prog to get the gpu temps? I have an EVGA card in the pc I'm running CUDA and they have a prog named EVGA Precision to control the fan speed and temps, among other things. Other progs I've used to get gpu temps have shown slightly different temps than what the EVGA prog showed, but never more than a couple of degrees, so I'd say the temps you're seeing are fairly accurate.
ID: 859903 · Report as offensive
Profile AlienDancer
Volunteer tester
Avatar

Send message
Joined: 8 Sep 99
Posts: 68
Credit: 12,473,416
RAC: 0
Message 859931 - Posted: 31 Jan 2009, 1:21:26 UTC - in response to Message 859903.  

I'm using NVIDIA System Monitor to monitor the temp, been using that one for a few weeks now. Had another one called H monitor but took it off when trial expired. Temps between the two are consistent.

I downloaded Rivatune last night but wasn't impressed so I took it off,back to using NVIDIA control panel. That's the one I have set up profiles the profile I pasted into my previous email. I can get it to load manually, But when I try to have it load automatically when temp is > 80 that doesn't seem to work even though the rule seems to have been created correctly in the profile polices.

Once upon a time when I built computers I could tell you who manufactured the card but now I can't. Obviously NVIDIA manufactured the chipset. The machine is a gateway fX4710 and this might be important the card is factory overclocked.
ID: 859931 · Report as offensive
Profile Byron S Goodgame
Volunteer tester
Avatar

Send message
Joined: 16 Jan 06
Posts: 1145
Credit: 3,936,993
RAC: 0
United States
Message 859943 - Posted: 31 Jan 2009, 1:45:34 UTC - in response to Message 859931.  

The machine is a gateway fX4710 and this might be important the card is factory overclocked.

That could have something to do with it. I do remember reading the fan settings may not act correctly on an OC'd card. You might want to think about adjusting the settings back to default for the card.
ID: 859943 · Report as offensive
Profile AlienDancer
Volunteer tester
Avatar

Send message
Joined: 8 Sep 99
Posts: 68
Credit: 12,473,416
RAC: 0
Message 859972 - Posted: 31 Jan 2009, 2:34:44 UTC - in response to Message 859943.  

I might have to do that as a last resort. I'm still hoping to discover a way to make the fan kick in at 100% when temp reaches 80C. With the GPU fan at 100% and another small desk fan blowing into the open case I just got temp down to 86C from 101C. Guess I could leave it at 100% but the noise is kind of annoying.

I'll just keep experimenting with it and only run cuda when I'm around to monitor the system.

Thanks you been helpful
ID: 859972 · Report as offensive
Profile Byron S Goodgame
Volunteer tester
Avatar

Send message
Joined: 16 Jan 06
Posts: 1145
Credit: 3,936,993
RAC: 0
United States
Message 859977 - Posted: 31 Jan 2009, 2:46:02 UTC - in response to Message 859972.  

Guess I could leave it at 100% but the noise is kind of annoying.

I hear ya, I played with mine and got all kind of settings to work, but in the end becuase of the loud fan, (and not really being worried about the card getting up to 84C) I just let the default setting kick in and it's a much more quite experience. To be honest, I saw no ill effects being up at 84C or any better performace being down in the 70's or 60's, that made me want to put up with the noise any longer than I had to.
ID: 859977 · Report as offensive
Profile Campi
Avatar

Send message
Joined: 29 Jun 99
Posts: 4
Credit: 29,466,396
RAC: 27
United States
Message 861316 - Posted: 2 Feb 2009, 23:15:38 UTC

if you want to keep your card for a good time... manually increase the fan speed to 60-80% if you are going to use veavy graphs or don't mind the little noise I do recommend 100% fan speed.. it would keep your system.. all of it from getting more heat than necessary...
I noticed in several community boards that cuda is not managing the fans as it should.. so it is recomended to do it manually.. 60C it is ok.. 70.. ok.. more than that not.. over 100... it is red zone !!


ID: 861316 · Report as offensive
Profile MeglaW
Volunteer tester

Send message
Joined: 21 Jun 00
Posts: 36
Credit: 479,460
RAC: 0
Sweden
Message 861724 - Posted: 4 Feb 2009, 1:24:31 UTC - in response to Message 859682.  

It's been running 95c for a long time anytime I do anything intense. I was worried about it at first but doesn't seem to be a problem. I checked and there are a few others whose cards run that high. I notice a post last night where someone got their temps down by loading the new drivers and this morning after running cuda all night my temps were 89c. That's a 6c drop. I'm also going to try RivaTune and I've had the case open and a fan blowing directly into it ever since the summer when I got higher temps.

Bottom line - while I'd rather not go through the hassle of replacing the card, this thing has an extended warranty until Aug 2011 -- so I'm not too worried about frying the card.


maby it will hold up for 3 years, but it wont hold up for ten, let alone 20. its FLOPS will still be usefull for years and years, even if it might be not so cost effective, it will still give you points. :)

also, as temp goes up the chance of the gpu making calculation errors increses, as i can see above your having problems with. :)
ID: 861724 · Report as offensive

Questions and Answers : GPU applications : Controling CUDA in preferences


 
©2024 University of California
 
SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.