5.10.20 running good on 2 of my rigs.

---

I'll stick with 5.9.0.64 that was compiled by Crunch3r. :D

---

The T1 Trust, PRR T1 Class 4-4-4-4 #5550, 1 of America's First HST's

Do any of the recent versions affect the speed by which a WU is crunched. My assumption is no since the SETI application does the actual crunching but, hey, I have to ask.

---

Do any of the recent versions affect the speed by which a WU is crunched. My assumption is no since the SETI application does the actual crunching but, hey, I have to ask.

All I know is that 5.10.13 was making errors and 5.9.0.64 wasn't so back I went. When Crunch3r makes a 5.10.x version of His Boinc files I'll try that and see If It works or not, Until then I'm staying put at 5.9.0.64 until further notice.

I guess You could say I like Crunchy Chicken. ;)

---

The T1 Trust, PRR T1 Class 4-4-4-4 #5550, 1 of America's First HST's

I'm running older versions but not antique ones.

I was just curious if there's an advantage (other than WU's not needed being purged) to any of the newer versions.

---

Do any of the recent versions affect the speed by which a WU is crunched. My assumption is no since the SETI application does the actual crunching but, hey, I have to ask.

Unless the CC is fatally flawed and causes the app to crap out or malfunction, it should have no effect on performance other than the time it needs to execute its functions.

Alinator

I'm running older versions but not antique ones.

I was just curious if there's an advantage (other than WU's not needed being purged) to any of the newer versions.

Antique? What antique?

---

The T1 Trust, PRR T1 Class 4-4-4-4 #5550, 1 of America's First HST's

I'm running older versions but not antique ones.

I was just curious if there's an advantage (other than WU's not needed being purged) to any of the newer versions.

Antique? What antique?

I'm running 5.8.16, I don't think that's antique, lol.

---

I'm running older versions but not antique ones.

I was just curious if there's an advantage (other than WU's not needed being purged) to any of the newer versions.

Antique? What antique?

I'm running 5.8.16, I don't think that's antique, lol.

I run 5.9.0.64 as It does things for Me as I'm a disabled person, Besides It keeps My anxiety down. I at least tried the newer versions, They aren't for Me and so for the foreseeable future this is what I'll use everywhere.

---

The T1 Trust, PRR T1 Class 4-4-4-4 #5550, 1 of America's First HST's

When I switched to 5.10.20 a while back it solved my "no work" problem. I now have tons of workunits from Seti. The new BOINC client has worked flawlessly on both my computers.

Franz

5.10.20 for Windows reports the wrong local time on my PC 2604528.
It says UTC+1, but here in Germany we have UTC+2 (CEST).
Is that a bug? Should I stop the client?

---

Why should I upgrade from 5.10.13 to 5.10.20 ??
There's no changelog other than for 5.10 in general!

Edit\\ Why am I crunching WU's with a deadline in December - when I have a bunch of WU's due in September?
Is that a 'future' that has been changes in the new BOINC-client?

Edit2\\ Thx for the link Keith

Kiva

---

Greetings from Norway

Crunch3er & AK-V8 Inside

BOINC Change Log is here.

I'm currently running 5.10.7 on my Win XP host, 5.8.15 on Win 98.

I have downloaded 5.10.20 but not installed yet. Only just changed SETI app to KWSN 2.4 GFX version, so I don't want to change too many things at once.

Keith

---

Sir Arthur C Clarke 1917-2008

Why should I upgrade from 5.10.13 to 5.10.20 ??
....

Well it seems to have a cool icon :P

---

"Living by the wisdom of computer science doesn't sound so bad after all. And unlike most advice, it's backed up by proofs." -- Algorithms to live by: The computer science of human decisions.

I just installed the new version and it works well. However, it reports the wrong time zone (it reports UTC+1 but due to DST it should actually be UTC+2).
However, I think this is a minor bug and I can't imagine that is has any adverse effects on SETI.

---

Last nigth i upgraded from 5.10.13 to 5.10.20 (recomended).

Since that i have a problem... The completed WU's are uploaded correctly, but don't reported automatically as with the 5.10.13. The WU's are stay in 'ready to report' until I press manually the 'update' button.

In the message tab only appears the correct uploading messages:
04/09/2007 12:37:35|SETI@home|[file_xfer] Started upload of file 11fe07ad.6249.18881.9.5.203_1_0
04/09/2007 12:37:43|SETI@home|[file_xfer] Finished upload of file 11fe07ad.6249.18881.9.5.203_1_0
04/09/2007 12:37:43|SETI@home|[file_xfer] Throughput 7131 bytes/sec
04/09/2007 13:23:18|SETI@home|Computation for task 11fe07ad.6062.18881.7.5.38_1 finished
04/09/2007 13:23:18|SETI@home|Starting 11fe07ad.5995.21744.6.5.200_1
04/09/2007 13:23:18|SETI@home|Starting task 11fe07ad.5995.21744.6.5.200_1 using setiathome_enhanced version 527
04/09/2007 13:23:20|SETI@home|[file_xfer] Started upload of file 11fe07ad.6062.18881.7.5.38_1_0
04/09/2007 13:23:29|SETI@home|[file_xfer] Finished upload of file 11fe07ad.6062.18881.7.5.38_1_0
04/09/2007 13:23:29|SETI@home|[file_xfer] Throughput 6589 bytes/sec


But dont appear the typical message 'Sending scheduler request reporting N tasks'...

I don't changed nothing in my local preferences and with 5.10.13 all was working without the need of press update button manually for report...

Anybody knows why...?

---

Logan.

BOINC FAQ Service (Ahora, también disponible en Español/Now available in Spanish)

Last nigth i upgraded from 5.10.13 to 5.10.20 (recomended).

Since that i have a problem... The completed WU's are uploaded correctly, but don't reported automatically as with the 5.10.13. The WU's are stay in 'ready to report' until I press manually the 'update' button.

They have changed to report rules . It is in the changelogs a couple of posts down. It can now take up to a day before a result is reported.

---

Last nigth i upgraded from 5.10.13 to 5.10.20 (recomended).

Since that i have a problem... The completed WU's are uploaded correctly, but don't reported automatically as with the 5.10.13. The WU's are stay in 'ready to report' until I press manually the 'update' button.

They have changed to report rules . It is in the changelogs a couple of posts down. It can now take up to a day before a result is reported.

Thanks for the news...

Where are the changelogs? I cant find them...

---

Logan.

BOINC FAQ Service (Ahora, también disponible en Español/Now available in Spanish)

Last nigth i upgraded from 5.10.13 to 5.10.20 (recomended).

Since that i have a problem... The completed WU's are uploaded correctly, but don't reported automatically as with the 5.10.13. The WU's are stay in 'ready to report' until I press manually the 'update' button.

They have changed to report rules . It is in the changelogs a couple of posts down. It can now take up to a day before a result is reported.

Thanks for the news...

Where are the changelogs? I cant find them...

There is a link in this thread 6 posts down.

---

Last nigth i upgraded from 5.10.13 to 5.10.20 (recomended).

Since that i have a problem... The completed WU's are uploaded correctly, but don't reported automatically as with the 5.10.13. The WU's are stay in 'ready to report' until I press manually the 'update' button.

They have changed to report rules . It is in the changelogs a couple of posts down. It can now take up to a day before a result is reported.

Thanks for the news...

Where are the changelogs? I cant find them...

There is a link in this thread 6 posts down.

I found it...! Thanks...

---

Logan.

BOINC FAQ Service (Ahora, también disponible en Español/Now available in Spanish)