Questions and Answers :
Preferences :
Computer Location not working
Message board moderation
Author | Message |
---|---|
huns0004 Send message Joined: 14 Jun 01 Posts: 46 Credit: 3,208,956 RAC: 1 |
I am having a problem with the computer location setting. My computer set to "Work" keeps on reverting to "Home," no matter how many times I try to update it from this website. Also, when I click on "Update" in the BOINC client at work, it doesn't use the separate preferences for work, it just says it is "using your defaults." The separate preferences use to work for me, this is something that just started recently. |
Toby Send message Joined: 26 Oct 00 Posts: 1005 Credit: 6,366,949 RAC: 0 |
I'm having the same problem. I decided to set up some 'work' preferences which would casue the client to only cache 0.2 days worth of work so that I don't dump a bunch of work units when I want to detach a computer from a project for some reason. But I can't get my computer changed from its default location to 'work'. I would rather not change the 'home' preferences since that would change all my computers. ------------------------------------------- - A member of The Knights Who Say NI! Possibly the best stats site in the universe: http://boinc-kwsn.no-ip.info |
[B^S] iimotion Send message Joined: 25 Nov 01 Posts: 25 Credit: 384,195 RAC: 0 |
All user profile/preferences updates between August 13th and 18th were lost due to systemcrash. It might be that you have to update your profile/preferences. |
Roelof Send message Joined: 9 Jan 00 Posts: 9 Credit: 542,378 RAC: 0 |
> All user profile/preferences updates between August 13th and 18th were lost > due to systemcrash. It might be that you have to update your > profile/preferences. No, it's not that. Every time you change the computer location, on your preferences-web-page for a computer, it looks like it is accepted (as you can check by updating the preferences on the client), but the next time you get the web-page, it always shows "Home" for the location. If you change preferences, you have to set the location again, as the web-page always resets it, and also stores it if you save the changes. |
Jason L. Allerdings Send message Joined: 21 May 99 Posts: 8 Credit: 42,287 RAC: 0 |
> > All user profile/preferences updates between August 13th and 18th were > lost > > due to systemcrash. It might be that you have to update your > > profile/preferences. > > No, it's not that. Every time you change the computer location, on your > preferences-web-page for a computer, it looks like it is accepted (as you can > check by updating the preferences on the client), but the next time you get > the web-page, it always shows "Home" for the location. > If you change preferences, you have to set the location again, as the web-page > always resets it, and also stores it if you save the changes. > > > I've noticed that it does retain the location on the computer web page until the client on that computer calls the server to upload/download and update information, then the location on the web page is reset to the home location. |
Jeff Send message Joined: 6 Oct 99 Posts: 8 Credit: 4,627,693 RAC: 0 |
> I'm having the same problem. I decided to set up some 'work' preferences > which would casue the client to only cache 0.2 days worth of work so that I > don't dump a bunch of work units when I want to detach a computer from a > project for some reason. But I can't get my computer changed from its default > location to 'work'. I would rather not change the 'home' preferences since > that would change all my computers. I'm also having the same problem, but even when I change the "home" preferences, the settings still don't work. In my case I'm attempting to set "Do work while computer is in use" to "no" because even at low priority BOINC is taking half of my hyperthreaded p4 away from my foreground apps. |
Urban Send message Joined: 4 Jan 00 Posts: 26 Credit: 835,395 RAC: 0 |
All, I've found a solution, better a hack for these Problem. 1. Exit the complete bionc_gui, it's a must!!! 2. edit the file client_state.xml in the BOINC installation directory. 3. go at the end and change eg. home into work save it 4. start boinc again and after an update Your Computer is set to work Good luck Urban |
Urban Send message Joined: 4 Jan 00 Posts: 26 Credit: 835,395 RAC: 0 |
> All, > > I've found a solution, better a hack for these Problem. > > 1. Exit the complete bionc_gui, it's a must!!! > 2. edit the file client_state.xml in the BOINC installation directory. > 3. go at the end and change eg. home into work save it > 4. start boinc again and after an update Your Computer is set to work > > Good luck > Urban > > I found on an other Computer that the mentioned line 3. isn't there. If Your are at the end of the file and the line home isn't there, then just add these one before the line You can then store for the value home also work or school. @the Boinc Developers/HelpDesk my guess is, that the "master" for that Value is not the WebSite it's the Client self and a change of that Value will NOT be stored there! |
Urban Send message Joined: 4 Jan 00 Posts: 26 Credit: 835,395 RAC: 0 |
After I read my post I saw that the XML Commands are now hidden :-( I replace now the with ) Here the needed line: (host_venue)work(/host_venue) These line should just before the Line (/client_state) My understanding is that only the host_venue line controls, which type the client is, the Web Settings are not passed to the client. |
©2024 University of California
SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.