I've Just set up an ASROCK K7VM3 board and need FID jumper settings for a Sempron 2400+.
Any Help?

Thanks,

Jim Scott

I've Just set up an ASROCK K7VM3 board and need FID jumper settings for a Sempron 2400+.
Any Help?

Thanks,

Jim Scott

Don't know if this will help.

http://www.asrock.com/Drivers/Manual/Jumer_setting_K7_A.pdf

I've Just set up an ASROCK K7VM3 board and need FID jumper settings for a Sempron 2400+.
Any Help?

Thanks,

Jim Scott

Don't know if this will help.

http://www.asrock.com/Drivers/Manual/Jumer_setting_K7_A.pdf

That's some good info I didn't have.
But they still avoided the CPU multiplier settings for the different processors.

Thanks,

Jim Scott

Google is your friend.......:-)

ASROCK K7VM3

It took 20 seconds to find the jumper settings.

Google is your friend.......:-)

ASROCK K7VM3

It took 20 seconds to find the jumper settings.

Where? From AMD or ASR? Those are the only one's I can't seem to find,
(hellllp....).

Thanks in advance, >:-)

Jim Scott

Google is your friend.......:-)

ASROCK K7VM3

It took 20 seconds to find the jumper settings.

"I'm trying to maintain a shred of dignity in this world." - Me

Google is your friend.......:-)

ASROCK K7VM3

It took 20 seconds to find the jumper settings.

Where? From AMD or ASR? Those are the only one's I can't seem to find,
(hellllp....).

Thanks in advance, >:-)

Jim Scott

If you google Sempron 2400+ specifications there's plenty of results.
It's a 1.667GHz processor with a 333MHz front side bus.
http://www.dealtime.com/xPF-AMD_AMD_Sempron_2400_1_6Ghz_Socket_A_256KB_333Mhx_Boxed


For the jumper settings look at the user manual
http://www.asrock.com/Drivers/Manual/K7VM3_UM.pdf

For a FSB of 333MHz FSB_SEL1 jumper 2-3

Speed is 1.667GHZ so the multiplier would be 5
That would be FID0 2-3 FID1 2-3 FID2 1-2 FID3 2-3 FID4 2-3

Just make sure your memory speed matches your FSB speed.

Google is your friend.......:-)

ASROCK K7VM3

It took 20 seconds to find the jumper settings.

You mean this Google?

I'm running,2/256 mb PC2100 / 266 fsb Crucial Memory, out of my old system could this be screwing things up? I jumped it for this mem.

Jim Scott }:-)

I'm running,2/256 mb PC2100 / 266 fsb Crucial Memory, out of my old system could this be screwing things up? I jumped it for this mem.

Jim Scott }:-)

FSB of 266MHz FSB_SEL1 jumper off?
Multiplier 6 FID0 2-3 FID1 1-2 FID2 1-2 FID3 2-3 FID4 2-3 ?
Speed would be 1596 (slight underclock)

should work (according to what info I've been able to find) but your best solution would be the proper bus speed, multiplier, and memory.

[font='courier,courier new']I've got a bad feeling that someone's gonna say "FGI"...[/font]

Where are ya'll finding all of these settings?

Jim Scott

Thanks i;ll try that in the AM. OUCH! Gave wrong info is a 2200+.
Where are ya'll finding all of these settings?

Jim Scott

Thanks i;ll try that in the AM. OUCH! Gave wrong info is a 2200+.
Where are ya'll finding all of these settings?

Jim Scott

Google Sempron 2200+ specifications. FSB is 333MHz, Processor speed is 1.5GHz. Go through the manual here and set the FSB_SEL (front side bus speed) and FID jumpers (multiplier). With a 333MHz FSB the multiplier would be 4.5. With a 266MHz FSB the multiplier would be 5.5 (can't do a multiplier of 5.63 so it's an underclock to 1.43GHz).